Important to understand the differences and how they appear.<\/p>\n
REGISTERING<\/strong> <\/span>– This is a button on the SmartDancer Controller.\u00a0 Pressing it sends THAT<\/strong> controllers formations<\/strong> <\/span>to the matching animesh\/avatars.<\/p>\n ACTIVATION<\/strong> <\/span>– This determines WHICH SmartDancer Controllers<\/span> <\/strong>will receive and respond to commands from the Artiste Performance HUD<\/strong> via autofx commands.<\/p>\n Activation NOW happens AUTOMATICALLY<\/strong> when you REGISTER<\/strong>.\u00a0 It makes THAT controller that you pressed the Register button on, the ACTIVE Controller and makes all other controllers INACTIVE.<\/p>\n A controller CANNOT<\/strong> <\/span>be operated locally\/manually if it is NOT ACTIVE.\u00a0 This helps avoid confusion as to which controller is in charge at any one time. It is smart to REGISTER a given controller when you want to use it. It will deactivate all other controllers. You can see which controller is active on the controller menu.<\/p>\n You normally ACTIVATE<\/strong> a controller thru the autofx command SD=ID? where ? is a number between 0 and 9 (or more?);<\/p>\n RESETTING<\/strong> a controller AUTOMATICALLY<\/strong> makes it ACTIVE<\/strong>.\u00a0 Yes, you could have more than 1 Controller ACTIVE at the same time, if that is your intention but the last one RESET becomes the one that sends formations to avatar\/animesh so I am not sure what the value would be in that.\u00a0 And sending autofx commands would be confusing.\u00a0 So its best to REGISTER a specific controller after you have reset 1 or more controllers.<\/p>\n SENDING<\/strong> an ID of zero<\/span>\u00a0<\/strong> (i.e.\u00a0 \u00a01,SD=ID0<\/span><\/strong>)\u00a0 sends subsequent autofx\u00a0 SD commands to ALL Controllers whether they are active<\/span> OR inactive<\/span><\/strong><\/p>\n You Set<\/strong> a controllers ID using the *channels nc in the controller.<\/p>\n ActivationId,1<\/strong><\/span> Yes, you can have the SAME\u00a0<\/b>ActivationID on multiple controllers, if that is your intent.<\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":" Important to understand the differences and how they appear. REGISTERING – This is a button on the SmartDancer Controller.\u00a0 Pressing it sends THAT controllers formations to the matching animesh\/avatars. ACTIVATION – This determines WHICH SmartDancer Controllers will receive and respond to commands from the Artiste Performance HUD via autofx commands. Activation NOW happens AUTOMATICALLY when … Continue reading SmartDancer 109 \u2013 Registering VS Activation<\/span>
\nUseTallBots,off
\nEnforceSameHeight,off
\nCanonIntervalOverride,2
\nTurnDurationOverride,5
\nChannelForSmartDancerFollower,-897434670
\nChannelForFromArtisteHUD,-722322179
\nChannelForIntraScriptPrepForm,-953186463
\nEND<\/p>\n